Omron SYSMAC CS Series Operation Manual page 821

Programmable controllers

Hide thumbs Also See for SYSMAC CS Series:

Table of Contents

CJ1W-CIF11 RS-422A Converter

Mounting to the Unit

Mount the Converter to the RS-232C port (D-Sub, 9-pin) of the Unit to be connected in the following way.

1. Align the Converter's connector with that of the Unit and push it into the Unit's connector as far as possible.

2. Tighten the mounting screws on either side of the Converter. (Tightening torque: 0.3 N⋅m.)

As an example, connection to a CS1-H CPU Unit is shown below.

Chapters

Table of Contents

Cs1g/h-cpu_h Cs1g/h-cpu_-ev1