Omron SYSMAC CS Series Operation Manual page 20

SYSMAC CS/CJ/NSJ Series
CQM1H-PRO01-E, C200H-PRO27-E, CQM1-PRO01-E
Programming Consoles Operation Manual
SYSMAC CS/CJ/NSJ Series
CS1G/H-CPU@@-EV1, CJ1G/H-CPU@@H, CS1D-CPU@@H,
CS1D-CPU@@S, CJ1M-CPU@@, CJ1H-CPU@@H-R, CJ1G-
CPU@@, CJ1G-CPU@@, CJ1G-CPU@@P, CJ1G/H-CPU@@H,
CS1W-SCB@@-V1, CS1W-SCU@@-V1,
CJ1W-SCU@@-V1, CP1H-X
@@@@ @
CP1H-Y -
Communications Commands Reference Manual
SYSMAC CS Series
CS1D-CPU@@H CPU Units
CS1D-CPU@@S CPU Units
CS1D-DPL01 Duplex Unit
CS1D-PA207R Power Supply Unit
Duplex System Operation Manual
@
SYSMAC WS02-CXPC
CX-Programmer Operation Manual
@
SYSMAC WS02-CXPC
CX-Programmer Ver. 7.0 Operation Manual Function Blocks
@@
(CS1G-CPU H, CS1H-CPU
@@
CJ1G-CPU H, CJ1H-CPU
@@ @@@@
CJ1M-CPU , CP1H-X
@@@@ @
CP1H-XA - , CP1H-Y
SYSMAC CS/CJ Series
CS1W-SCB@@-V1, CS1W-SCU@@-V1, CJ1W-SCU@@-V1
Serial Communications Boards/Units Operation Manual
SYSMAC WS02-PSTC1-E
CX-Protocol Operation Manual
CXONE-AL@@C-V4/AL@@D-V4
CX-Integrator Operation Manual
CXONE-AL@@C-V4/AL@@D-V4
CX-One Setup Manual
This manual contains the following sections.
Section 1 introduces the special features and functions of the CS-series PLCs and describes the dif-
ferences between these PLCs and other PLCs.
Section 2 provides tables of standard models, Unit specifications, system configurations, and a com-
parison between different Units.
Section 3 provides the names of components and their functions for various Units. The Unit dimen-
sions are also provided.
Section 4 outlines the steps required to assemble and operate a CS-series PLC system.
xx
Name
@@@@ @ @@@@
- , CP1H-XA
@
-E-V
@
-E-V
@@
H, CJ1H-CPU@@H-R,
@@
H,
@
- ,
@@@@ @
- CPU Units)
Cat. No.
W341 Provides information on how to program and
operate CS/CJ-series PLCs using a Program-
ming Console.
W342 Describes the C-series (Host Link) and FINS
communications commands used with CS/CJ-
series PLCs.
@
- ,
W405 Provides an outline of and describes the
design, installation, maintenance, and other
basic operations for a Duplex System based
on CS1D CPU Units.
W446 Provides information on how to use the CX-
Programmer for all functionality except for
function blocks.
W447 Describes the functionality unique to the CX-
Programmer and CP-series CPU Units or CS/
CJ-series CPU Units with unit version 3.0 or
later based on function blocks. Functionality
that is the same as that of the CX-Program-
mer is described in W446 (enclosed).
W336 Describes the use of Serial Communications
Unit and Boards to perform serial communica-
tions with external devices, including the
usage of
standard system protocols for OMRON prod-
ucts.
W344 Describes the use of the CX-Protocol to cre-
ate protocol macros as communications
sequences to communicate with external
devices.
W464 Describes operating procedures for the CX-
Integrator Network Configuration Tool for CS-,
CJ-, CP-, and NSJ-series Controllers.
W463 Installation and overview of CX-One FA
Integrated Tool Package.
Contents