Omron SYSMAC CS Series Operation Manual page 126

Specifications
Item
Power C200HW-
Supply PA204
Unit
Output Not provided
terminal
(service
supply)
RUN Not provided
output
(See note
2.)
Replace- Not provided
ment
notifica-
tion
function
Insulation 20 MΩ min.
resistance (at 500 V DC)
between AC
external and
GR terminals
(See note 1.)
Dielectric 2,300 V AC
strength 50/60 Hz for
(See note 1 min
5.) between AC
external and
GR terminals
(See note 1.)
Leakage cur-
rent: 10 mA
max.
1,000 V AC, 50/60 Hz for 1 minute between all alarm output terminals and
GR terminal with a leakage current of 10 mA max.
Noise 2 kV on power supply line (conforming to IEC61000-4-4)
immunity
88
C200HW- C200HW-
PA204C PA204R
Not provided Not provided
Not provided Contact con-
figuration:
SPST-NO
Switch
capacity:
250 V AC,
2 A (resistive
load)
250 V AC,
0.5 A (induc-
tion load),
24 V DC, 2 A
With Not provided
Alarm output
(open-collec-
tor output)
30 V DC
max., 50 mA
max.
20 MΩ min. 20 MΩ min.
(at 500 V DC)
(at 500 V DC)
between all
between AC
external ter-
external and
minals and
GR terminals
GR terminal,
(See note 1.)
and between
all alarm out-
put terminals.
20 MΩ min.
(at 250 V DC)
between all
alarm output
terminals and
GR terminal.
2,300 V AC, 2,300 V AC
50/60 Hz for 1 50/60 Hz for
minute 1 min
between all between AC
external ter- external and
minals and GR terminals
GR terminal (See note 1.)
and between
Leakage cur-
all alarm out-
rent: 10 mA
put terminals
max.
with a leak-
age current of
10 mA max.
Specifications
C200HW- C200HW-
PA204S PA209R
Provided. Not provided
At consump-
tion of less
than 0.3 A,
24-V DC sup-
ply will be
+17%/–11%;
at 0.3 A or
greater,
+10%/–11%
(lot 0197 or
later)
Not provided Contact con-
figuration:
SPST-NO
Switch capac-
ity: 240 V AC,
2A (resistive
load)
120 V AC,
0.5 A (induc-
tion load)
24 V DC, 2 A
(resistive
load)
24 V DC, 2 A
(induction
load)
Not provided Not provided
20 MΩ min. 20 MΩ min.
(at 500 V DC)
(at 500 V DC)
between AC
between AC
external and
external and
GR terminals
GR terminals
(See note 1.)
(See note 1.)
2,300 V AC 2,300 V AC
50/60 Hz for 50/60 Hz for
1 min 1 min
between AC between AC
external and external and
GR terminals GR terminals
(See note 1.) (See note 1.)
Leakage cur- Leakage cur-
rent: 10 mA rent: 10 mA
max. max.
Section 2-1
C200HW- C200HW-
PD024 PD025
Not provided Not provided
Not provided Not provided
Not provided Not provided
20 MΩ min.
(at 500 V DC) between DC
external and GR terminals
(See note 1.)
1,000 V AC 50/60 Hz for
1 min between DC external
and GR terminals (See note
1.).
Leakage current: 10 mA max.