Omron SYSMAC CS Series Operation Manual page 381

PLC Setup
Mode Setting
Programming
Console address
Word Bit(s)
+81 --- Use programming console
(PRCN):
Programming Console's
mode switch
Program: PROGRAM
mode
Monitor: MONITOR mode
Run: RUN mode
Default: Program
Execution Settings
Startup Condition (CS1-H CPU Units Only)
Programming
Console address
Word Bit(s)
+83 15 0: Wait for Units and
Boards.
1: Don't wait.
Default: 0
Inner Board Setting (CS1-H CPU Units Only)
Programming
Console address
Word Bit(s)
+84 15 0: Wait for Boards.
1: Don't wait.
Default: 0
Settings
This setting determines whether the
Startup Mode will be the mode set on
the Programming Console's mode switch
or the mode set here in the PLC Setup.
If this setting is PRCN and a Program-
ming Console isn't connected, startup
mode will depend on the CPU Unit being
used.
CS1 CPU Unit: PROGRAM mode
CS1-H CPU Unit: RUN mode
Settings
To start the CPU Unit in MONITOR or PRO-
GRAM mode even if there is one or more
Boards or Units that has not completed star-
tup processing, set this setting to 1 (Don't
wait for Units and Boards). (The operation
for Inner Boards, however, also depends on
the next setting.)
To wait for all Units and Boards to finish star-
tup processing, set this setting to 0 (Wait for
Units and Boards).
Note This setting applies only to specific Units and Boards.
Specific Units
This setting applies to the ITNC-EIS01-CST and ITNC-EIX01-CST Open Net-
work Controller-CS1 Bus Interface Units.
Specific Boards
There are currently no Inner Boards that are applicable as of July 2006.
Settings
To start the CPU Unit in MONITOR or PRO-
GRAM mode even if there is one or more of
Boards that has not completed startup pro-
cessing, set this setting to 1 (Don't wait for
Boards).
To wait for all Boards to finish startup process-
ing, set this setting to 0 (Wait for Boards).
This setting is valid only if the Startup Condi-
tion is set to 1 (Don't wait for Units and
Boards).
Note There are currently no Inner Boards that are applicable as "Specific Boards"
as of July 2006.
Function
Function
Function
Section 7-1
Related New
flags and setting's
words effective-
ness
--- Takes effect
at startup
Related New
flags and setting's
words effective-
ness
--- Takes effect
at startup
Related New
flags and setting's
words effective-
ness
--- Takes effect
at startup
343