Omron SYSMAC CS Series Operation Manual page 719

Specifications of Basic I/O Units and High-density I/O Units
CS1W-MD292 DC Input/Transistor Output Unit (48/48 Points, Sourcing)
Outputs (CN1)
Inputs (CN2)
Rated Voltage
Operating Load Voltage Range 10.2 to 26.4 V DC
Maximum Load Current
Maximum Inrush Current
Leakage Current
Residual Voltage
ON Response Time
OFF Response Time
No. of Circuits
Fuse
External Power Supply
Insulation Resistance
Dielectric Strength
Internal Current Consumption
Weight
Accessories
Note The maximum load currents will be 1.0 A/common and 3.0 A/Unit if a
pressure-welded connector is used.
Rated Input Voltage
Operating Input Voltage
Input Impedance
Input Current
ON Voltage/ON Current
OFF Voltage/OFF Current
ON Response Time
OFF Response Time
No. of Circuits
Number of Simultaneously ON
Points
Insulation Resistance
Dielectric Strength
Internal Current Consumption
Weight
Accessories
12 to 24 V DC
0.1 A/point, 1.2 A/common, 3.6 A/Unit (See note.)
1.0 A/point, 10 ms max.
8.0 A/common, 10 ms max.
0.1 mA max.
1.5 V max.
0.5 ms max.
1.0 ms max.
48 points (16 points/common, 3 commons)
3 A (1 per common)
The fuse cannot be replaced by the user.
10.2 to 26.4 V DC, 50 mA min.
20 MΩ between the external terminals and the GR
terminal (100 V DC)
1,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
350 mA max. at 5 V DC
320 g max.
Two connectors for external wiring (soldered)
24 V DC
20.4 to 26.4 V DC
4.7 kΩ
Approx. 5 mA (at 24 V DC)
17 V DC min./3 mA min.
5.0 V DC max./1 mA max.
8.0 ms max. (Possible to select one out of eight
times from 0 to 32 ms in the PLC Setup.) (See note
below.)
8.0 ms max. (Possible to select one out of eight
times from 0 to 32 ms in the PLC Setup.) (See note
below.)
48 points (16 points/common, 3 commons)
50% (8 points/common) (at 24 V DC) (Depends on
ambient temperature.)
20 MΩ between the external terminals and the GR
terminal (100 V DC)
1,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
350 mA max. at 5 V DC
320 g max.
Two connectors for external wiring (soldered)
Appendix A
681