Omron SYSMAC CS Series Operation Manual page 137

Basic System Configuration
Name
Standard CPU CS1W-BC023
Backplanes
CS1W-BC033
CS1W-BC053
CS1W-BC083
CS1W-BC103
CS-series-only CPU CS1W-BC022
Backplanes
CS1W-BC032
CS1W-BC052
CS1W-BC082
CS1W-BC102
Name
Power Supply Units
Memory Cards
Serial Communications
Boards
Programming Consoles
Programming Console
Key Sheet
Programming Console
Connecting Cables
Programming Device
Connecting Cables
(for peripheral port)
Note: 1. C200H Units (C200H Basic I/O Units, C200H Group-2 High-density I/O Units, and C200H Special I/O
Units) cannot be used with CS-series-only CPU Backplanes.
2. When using the CX-Programmer with the computer connected via a Programming Device Connecting
Cable for the peripheral port, a Host Link (SYSWAY) software connection is not possible. Use a toolbus
(peripheral bus) connection.
Model
2 slots (Expansion Racks cannot be connected)
3 slots
5 slots
8 slots
10 slots
2 slots (See note 1.)
3 slots (See note 1.)
5 slots (See note 1.)
8 slots (See note 1.)
10 slots (See note 1.)
Model
C200HW-PA204
C200HW-PA204C
C200HW-PA204R
C200HW-PA204S
C200HW-PA209R
C200HW-PD024
C200HW-PD025
HMC-EF372
HMC-EF672
HMC-EF183
HMC-AP001
CS1W-SCB21
CS1W-SCB41
CQM1H-PRO01-E
CQM1-PRO01-E
C200H-PRO27-E
CS1W-KS001-E
CS1W-CN114
CS1W-CN224
CS1W-CN624
CS1W-CN118
CS1W-CN226
CS1W-CN626
Specifications
Specifications
100 to 240 V AC
Output capacity: 4.6 A at 5 V DC
100 to 240 V AC (with replacement notification)
Output capacity: 4.6 A at 5 V DC
100 to 240 V AC (with RUN output)
Output capacity: 4.6 A at 5 V DC
100 to 120 V AC or 200 to 240 V AC (with 0.8 A 24 V DC service
power supply)
Output capacity: 4.6 A at 5 V DC
100 to 120 V AC or 200 to 240 V AC (with RUN output)
Output capacity: 9 A at 5 V DC
24 V DC
24 V DC
Flash memory, 30 MB
Flash memory, 64 MB
Flash memory, 128 MB (See note 3.)
Memory Card Adapter
2 × RS-232C ports, protocol macro function
1 × RS-232C port + 1 × RS-422/485 port, protocol macro function
An English Keyboard Sheet (CS1W-KS001-E) is required.
For CQM1-PRO01 or C200H-PRO27
Connects the CQM1-PRO01-E Programming Console.
(Length: 0.05 m)
Connects the CQM1-PRO27-E Programming Console.
(Length: 2.0 m)
Connects the CQM1-PRO27-E Programming Console.
(Length: 6.0 m)
Connects DOS computers, D-Sub 9-pin receptacle (For converting
between RS-232C cable and peripherals) (Length: 0.1 m)
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m)
Connects DOS computers, D-Sub 9-pin (Length: 6.0 m)
Section 2-3
99