Omron SYSMAC CS Series Operation Manual page 21

Section 5 describes how to install a PLC System, including mounting the various Units and wiring the
System. Be sure to follow the instructions carefully. Improper installation can cause the PLC to mal-
function, resulting in very dangerous situations.
Section 6 describes the settings of the DIP switch and how they affect operation.
Section 7 describes the settings in the PLC Setup and how they are used to control CPU Unit opera-
tion.
Section 8 describes I/O allocations to Basic I/O Units, Special I/O Units, and CPU Bus Units, and data
exchange with Units.
Section 9 describes the structure and functions of the I/O Memory Areas and Parameter Areas.
Section 10 describes the internal operation of the CPU Unit and the cycle used to perform internal
processing.
Section 11 provides information on hardware and software errors that occur during PLC operation.
Section 12 provides inspection and maintenance information.
The Appendices provide Unit specifications, current/power consumptions, Auxiliary Area words and
bits, a comparison of CS-series and previous PLCs, internal I/O addresses, and PLC Setup settings.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
xxi