Omron SYSMAC CS Series Operation Manual page 690

Specifications of Basic I/O Units and High-density I/O Units
Terminal Connections
12 to 24 V DC
12 to 24 V DC
• When wiring, pay careful attention to the polarity. The load may operate if the polarity is reversed.
• Although the +V and COM terminals of rows A and B of CN1 and CN2 are internally connected, wire all
points completely.
C200H-OD219 Transistor Output Unit (64 Points)
652
I/O word "m+1" I/O word "m"
Max. Switching Capacity
Leakage Current
Residual Voltage
ON Response Time
OFF Response Time
No. of Circuits
Internal Current Consumption
Fuses
Power for External Supply
Weight
I/O word "m+2"
12 to
24 V DC
12 to
24 V DC
12 to
24 V DC
16 mA 4.5 V DC to 100 mA 26.4 V DC (see below)
0.1 mA max.
0.8 V max.
0.1 ms max.
0.4 ms max.
2 (32 points/common)
270 mA 5 V DC max.
Two 3.5 A fuses (1 fuse/common)
The fuses are not user-replaceable.
220 mA 5 to 24 V DC±10% min.
(3.4 mA × number of ON pts)
250 g max.
Appendix A
I/O word "m+3"
12 to
24 V DC