C200H Group-2 High-Density I/O Units - Omron SYSMAC CS Series Operation Manual

Basic I/O Units
3-6-5

C200H Group-2 High-density I/O Units

Models
Components and Switch Settings
Model label
I/O indicators
I/O No. setting switch
(Cannot be used with
the CS-series)
I/O wiring connector
1. Units with One 40-pin Connector
232
C200H Group-2 High-density I/O Units are classified as Basic I/O Units.
Name
DC Input Unit
Transistor Output Unit 16 mA at 4.5 V to 100 mA
Note 1. C200H Group-2 High-density I/O Units cannot be mounted to SYSMAC
BUS Slave Racks.
2. Immediate refreshing (!) is not possible for C200H Group-2 High-density
I/O Units, but refreshing using IORF (097) is possible for these Units.
I/O No. setting switch
Note The I/O number setting switch on the front panel of C200H Group-2 High-den-
sity I/O Units is not used for the CS Series, i.e., the I/O number setting will not
affect allocations. Words are allocated to the Units according to their position
on the Rack in the same way as for Basic I/O Units.
Specifications
24 V DC, input current:
4.1 mA typical, 32 inputs
24 V DC, input current:
6 mA typical, 32 inputs
12 V DC, 64 inputs
24 V DC, input current:
4.1 mA typical, 64 inputs
24 V DC, input current:
6 mA typical, 64 inputs
at 26.4 V, 32 outputs
16 mA at 4.5 V to 100 mA
at 26.4 V, 64 outputs
24 V DC, 0.5 A, sourcing,
32 inputs
Unit mounting hooks
Hooked onto Back
plane to mount Unit.
Model label
I/O indicators
(Cannot be used with
the CS-series)
40-pin I/O wiring
connector × 2
2. Units with Two 40-pin Connectors
Section 3-6
Model Appearance/
dimensions
reference No.
C200H-ID216 1
C200H-ID218 1
C200H-ID111 2
C200H-ID217 2
C200H-ID219 2
C200H-OD218 1
C200H-OD219 2
C200H-OD21B 1
Indicator selector switch
(Select whether the I/O
indicator is CN1 or CN2.)