Omron SYSMAC CS Series Operation Manual page 146

Basic System Configuration
Rack Configurations
Rack
Standard CS-series Expan-
sion Racks
CS-series-only Expansion
Racks
C200H Expansion I/O Racks C200H Expansion I/O Backplane
CS-series Long-distance
Expansion Racks
Configuration Device List
Name
Standard CS-series Expan-
sion Backplanes
CS-series-only CS-series
Expansion Backplanes
C200H Expansion I/O
Backplanes
108
Configuration
CS-series Expansion Backplane
Power Supply Unit
CPU Backplane or CS-series
Expansion Backplane
C200H Expansion I/O
Backplane
CS-series-only Backplane
Power Supply Unit
CPU Backplane or CS-series
Expansion Backplane
Power Supply Unit
CS-series Expansion
Backplane
C200H Expansion I/O
Backplane
Mount an I/O Control Unit (CS1W-IC102) to the leftmost slot
on the CPU Rack or the last CS-series Expansion Rack.
Mount an I/O Interface Unit (CS1W-II102) to the leftmost
slot on each Long-distance Expansion Rack.
Attach a Terminator (CV500-TER01) to the last Long-dis-
tance Expansion Rack in each series. Two Terminators are
provided with the I/O Control Unit.
Model
CS1W-BI033
CS1W-BI053
CS1W-BI083
CS1W-BI103
CS1W-BI032
CS1W-BI052
CS1W-BI082
CS1W-BI102
C200HW-BI031
C200HW-BI051
C200HW-BI081-V1 (See note.) 8 slots
C200HW-BI101-V1 (See note.) 10 slots
Note Using the C200HW-BI081/BI101
The C200HW-BI081 or C200HW-BI101 can be used, but always use the
C200HW-BI081-V1 or C200HW-BI101-V1 if you are using the C200HW-
PA209R Power Supply.
CS I/O Connecting Cables
CS to C200H I/O Connecting
Cables
CS I/O Connecting Cables
CS to C200H I/O Connecting
Cables
C200H I/O Connecting
Cables
Specifications
3 slots
5 slots
8 slots
10 slots
3 slots
5 slots
8 slots
10 slots
3 slots
5 slots
Section 2-3
Remarks
One of each Unit is required.
Note CS-series Expansion
Racks can be con-
nected to C200H
Expansion I/O Racks,
however, C200H
Expansion I/O Racks
must be connected
after CS-series
Expansion Racks.
One of each Unit is required.
Note C200H Units and
Racks cannot be used
with CS-series-only
CPU Racks or Expan-
sion Racks.
One of each Unit is required.
Each I/O Control Unit and
I/O Interface Unit requires
one slot.
These Units are not allo-
cated I/O words.
Use CV-series I/O Connect-
ing Cables.
A CS-series Expansion Rack
cannot be connected to a
CS-series Long-distance
Expansion Rack using a CS
I/O Connecting Cable.
Cable Length
Can be used for Long-dis-
tance Expansion Racks.
Can be used for Long-dis-
tance Expansion Racks.
Cannot be used for Long-dis-
tance Expansion Racks.