Specifications Of Memory Card - Omron SYSMAC CS Series Operation Manual

File Memory
3-2-1

Specifications of Memory Card

Specifications
Precaution on Applicable Units
Memory Card Recognition Time
Model number
Memory Card capacity
Common Dimensions
specifications
Weight
Current
consumption
Environmental
specifications
No. of writes
Factory No. of files
specifications writable to
root directory
File system
The HMC-EF183 Memory Card cannot be used with the following CPU Units
and PTs. Confirm applicability when ordering.
1) CS-series CPU Units
• All CS1G-CPU@@H and CS1H-CPU@@H CPU Units manufactured
before January 9, 2002 (lot number 020108 and earlier)
• All CS1G-CPU@@, CS1G-CPU@@-V1, CS1H-CPU@@, and CS1H-
CPU@@-V1 CPU Units (i.e., those without an H in the model number suf-
fix (CPU@@H))
2) CJ-series CPU Units
• All CJ1G-CPU@@H and CJ1H-CPU@@H CPU Units manufactured before
January 9, 2002 (lot number 020108 and earlier)
• All CJ1G-CPU@@ CPU Units (i.e., those without an H in the model num-
ber suffix: CPU@@H)
3) NS7-series PTs
All NS7-SV0@ PTs manufactured before May 9, 2002 (lot number 0852 and
earlier)
Several seconds is normally required for the CPU Unit to recognize the Mem-
ory Card after it is inserted. The required time depends on the PLC's cycle
time, the Memory Card Capacity, the number of files stored on the Memory
Card, and other factors.
The recognition times given in the following table are guidelines for a CS1H-
CPU@@H CPU Unit with a PLC cycle time of 0.4 ms and all PLC Setup
parameters set to the default values.
Model
Recognition time 8 s
HMC-EF183
128 Mbytes
42.8 × 36.4 × 3.3 mm (W × H × T)
15 g max.
Approx. 30 mA (when used with PLC)
Same as general specifications of PLC
100,000 (guaranteed value)
511
FAT16
HMC-EF183 HMC-EF672
5 s
Section 3-2
HMC-EF672 HMC-EF372
64 Mbytes 30 Mbytes
HMC-EF372
3 s
173