Omron SYSMAC CS Series Operation Manual page 421

I/O Allocations
I/O Table Creation with CX-Programmer
1,2,3...
I/O Table Creation with a Programming Console
Creating I/O Tables without Mounted Units
I/O Table Creation with CX-Programmer
1,2,3...
Use the following procedure to create the I/O tables online with the CX-Pro-
grammer.
1. Double-click IO Table in the project tree in the main window. The I/O Table
Window will be displayed.
2. Select Options - Create. The models and positions of the Units mounted
to the Racks will be written to the CPU Unit as the registered I/O tables.
Use the following procedure to register the I/O table with a Programming Con-
sole.
FUN SHIFT
Note If the Rack first words have already been set from the CX-Program-
mer, "Rack 1st Word En" will be displayed on the second line (CS1-
H only).
9 7 1
0
With the CX-Programmer, I/O tables can be created offline without mounted
Units and then transferred to the CPU Unit. The information on Unit models
and mounting locations are written to the parameter area of the CPU Unit as
the registered I/O tables.
Use the following procedure to create the I/O tables offline with the CX-Pro-
grammer and then transfer them to the CPU Unit. Once the Units that are to
be mounted are set for each Rack, the CX-Programmer will automatically allo-
cate words according to Rack and slot positions starting from CIO 0000.
1. Double-click IO Table in the project tree in the main window. The I/O Table
Window will be displayed.
2. Double-click the Rack to be edited. The slots will be displayed for the Rack.
3. Right-click the slot to which to assign a Unit and select the Unit from the
pop-up menu.
000000 CT00
CLR
000000 I/O TBL ?
CH
DM
000000 I/O TBL
CHG
WRIT
000000 I/O TBL
3
WRIT
000000CPU BU ST?
WRITE
0:CLR 1:KEEP
000000 I/O TBL
1
WRIT OK
000000 CT00
CLR
Section 8-1
????
9713
383