Omron SYSMAC CS Series Operation Manual page 139

Basic System Configuration
CQM1H-PRO01-E/CQM1-PRO01-E
The Programming Console can be connected only to the peripheral port.
CS1W-KS001-E
English Keyboard
Sheet required.
CQM1H-PRO01-E,
CQM1-PRO01-E
Programming
Console
C200H-PRO27-E
The Programming Console can be connected only to the peripheral port.
CS1W-KS001-E
English Keyboard
Sheet required.
C200H-PRO27-E
Programming
Console
Note When an OMRON Programmable Terminal (PT) is connected to the RS-232C
port and Programming Console functions are being used, do not connect the
Programming Console at the same time.
The following cable is included with the
CQM1-PRO01-E Programming Console
Cable
Programming Console
CQM1H-PRO01-E Not required
(pre-wired).
CQM1-PRO01-E CS1W-CN114
Note Set pin 4 of the DIP switch on the
front panel of the CPU Unit to OFF.
Peripheral port
Programming Console Cable
CS1W-CN224
CQM1-PRO27-E
CS1W-CN624
Note Set pin 4 of the DIP switch on the
front panel of the CPU Unit to OFF.
Peripheral port
Section 2-3
Length
2 m
0.05 m
Length
2.0 m
6.0 m
101