Omron SYSMAC CS Series Operation Manual page 752

Auxiliary Area
Address Name
Words Bits
A090 to --- User
A093 Program
Date
A094 to --- Parameter
A097 Date
A099 A09900 UM Read
Protection
Status
A09901 Task Read
Protection
Status
A09902 Program
Write Pro-
tection Sta-
tus when
Read Pro-
tection Is
Set
A09903 Enable/Dis-
able Status
for Backing
Up the Pro-
gram to a
Memory
Card
A09914 IR/DR Oper-
ation
between
Tasks
A09915 Timer/
Counter PV
Refresh
Mode Flag
714
Function
These words contain in BCD the date and time that the
user program was last overwritten.
A09000 to A09007:
Seconds (00 to 59)
A09008 to A09015:
Minutes (00 to 59)
A09100 to A09107: Hour (00 to 23)
A09108 to A09115:
Day of month (01 to 31)
A09200 to A09207: Month (01 to 12)
A09208 to A09215: Year (00 to 99)
A09308 to A09307: Day of the week
(00: Sunday, 01: Monday, 02: Tuesday, 03: Wednes-
day, 04: Thursday, 05: Friday, 06: Saturday)
These words contain in BCD the date and time that the
parameters were last overwritten.
The format is the same as above
Indicates whether the entire user program in the PLC
is read-protected.
0: UM not read-protected.
1: UM read-protected.
Indicates whether read protection is set for individual
tasks.
0: Tasks not read-protected.
1: Tasks read-protected.
Indicates whether the program is write-protected.
0: Write-enabled.
1: Write-protected.
Indicates whether creating a backup program file
(.OBJ) is enabled or disabled.
0: Enabled.
1: Disabled.
Turn ON this bit to share index and data registers
between all tasks. Turn OFF this bit to use separate
index and data registers between in each task.
0: Independent
1: Shared (default)
Indicates whether the CPU Unit is storing
timer/counter PV in BCD or binary.
0: BCD mode
1: Binary mode
Appendix B
Status Status at Write timing/
after startup Related flags,
mode
change
Retained Retained Not supported by
CS1@-CPU@@(-V1)
Units
Retained Retained Not supported by
CS1@-CPU@@(-V1)
Units
Retained Retained When protection is set
or cleared
CPU Unit with unit ver-
sion 2.0 or later
Retained Retained When protection is set
or cleared
CPU Unit with unit ver-
sion 2.0 or later
Retained Retained When protection is set
or cleared
CPU Unit with unit ver-
sion 2.0 or later
Retained Retained When protection is set
or cleared
CPU Unit with unit ver-
sion 2.0 or later
Retained Retained Not supported by
CS1@-CPU@@(-V1)
Units
Retained Retained Not supported by
CS1@-CPU@@(-V1)
Units
settings