Analog Timer Units - Omron SYSMAC CS Series Operation Manual

Analog Timer Units

3-9

Analog Timer Units

Models
Analog Timer Units are classified as Basic I/O Units.
Analog Timer Units have 4 built-in timers (numbers 0 to 3). The timer settings
can be adjusted using the internal and external variable resistors without
requiring a Programming Device. The timer can also be used as a accumula-
tive register to temporarily pause the timer operation using a timer pause
input.
Name
Analog Timer Unit 4-point timer
Timer settings: 0.1 to 1.0 s, 1.0 to 10 s, 10
to 60 s, 1 to 10 min.
The Analog Timer Unit is classified as a Basic I/O Unit and is allocated one
word in the I/O Area. The word (16 bits) allocated to the Unit is used for the 4
timers' start input, pause input, time-up output, and data transfer with the CPU
Unit.
Allocated words
1 word (16 bits) 4 (bits 0 to 3)
4 (bits 4 to 7)
4 (bits 8 to 11)
The timer settings are adjusted using the internal and external variable resis-
tors. The timer settings can be selected using the DIP switch for each timer
number from one of the following four settings.
0.1 to 1 s, 1 to 10 s, 10 to 60 s, 1 to 10 min
Specifications
Bits Details
Set Bit
Pause Inputs
Time-up Outputs
Section 3-9
Model
C200H-TM001
Direction
CPU Unit to Ana-
log Timer Unit
CPU Unit to Ana-
log Timer Unit
Analog Timer Unit
to CPU Unit
265