Omron SYSMAC CS Series Operation Manual page 147

Basic System Configuration
Name
Power Supply Units
CS I/O Connecting Cables
CS to C200H I/O
Connecting Cables
C200H I/O Connecting
Cables
I/O Control Unit
I/O Interface Unit
Model
C200HW-PA204
C200HW-PA204C
C200HW-PA204R
C200HW-PA204S
C200HW-PA209R
C200HW-PD024
C200HW-PD025
CS1W-CN313 (See note.)
CS1W-CN713 (See note.)
CS1W-CN223
CS1W-CN323
CS1W-CN523
CS1W-CN133
CS1W-CN133B2
CS1W-CN311
CS1W-CN711
CS1W-CN221
CS1W-CN321
CS1W-CN521
CS1W-CN131
CS1W-CN131B2
C200H-CN311
C200H-CN711
C200H-CN221
C200H-CN521
C200H-CN131
CS1W-IC102
CS1W-II102
Note Restrictions in Using CS-series I/O Connecting Cables
When using a CS1W-CN313 or CS1W-CN713 CS-series I/O Connecting
Cable with a CS1-H CPU Unit, always use a Cable manufactured on Septem-
ber 20, 2001 or later. Do not use Cables that do not have manufacturing num-
bers or Cables manufacture earlier than September 20, 2001.
Specifications
100 to 240 V AC
Output capacity: 4.6 A at 5 V
DC
100 to 240 V AC (with
replacement notification)
Output capacity: 4.6 A at 5 V
DC
100 to 240 V AC (with RUN
output)
Output capacity: 4.6 A, 5 V
DC
100 to 120 V AC or 200 to
240 V AC (with 0.8 A 24 V
DC service power supply)
Output capacity: 4.6 A at 5 V
DC
100 to 120 V AC or 200 to
240 V AC (with RUN output)
Output capacity: 9 A at 5 V
DC
24 V DC
24 V DC
Connects CS-series Expan-
sion Backplanes to CPU
Backplanes or other CS-
series Expansion Back-
planes.
Connects C200H Expansion
I/O Backplanes to CPU
Backplanes or CS-series
Expansion Backplanes.
Connects C200H Expansion
I/O Backplanes to other
C200H Expansion I/O Back-
planes.
Mounts to the leftmost slot on
the CPU Rack or a CS-series
Expansion Rack to enable
connecting CS-series Long-
distance Expansion Racks.
Mounts to the leftmost slot on
an CS-series Long-distance
Expansion Rack.
Section 2-3
Cable Length
---
0.3 m
0.7 m
2 m
3 m
5 m
10 m
12 m
0.3 m
0.7 m
2 m
3 m
5 m
10 m
12 m
0.3 m
0.7 m
2 m
5 m
10 m
---
109