Omron SYSMAC CS Series Operation Manual page 392

PLC Setup
NT Link Settings
Mode: Communications Mode
Programming
Console address
Word Bit(s)
+160 8 to 11 02: 1:N NT Link
Default: 0
Baud Rate (bps)
Programming
Console address
Word Bit(s)
+161 0 to 7 00: Standard
0A: High-speed NT
Link*
Default: 00
NT Link Max. (Maximum Unit Number in NT Link Mode
Programming
Console address
Word Bit(s)
+166 0 to 3 0 to 7
Default: 0
Peripheral Bus Settings
Communications Settings
Programming
Console address
Word Bit(s)
+160 15
0: Standard*
1: PLC Setup (cus-
tom)
Default: 0
Mode: Communications Mode
Programming
Console address
Word Bit(s)
+160 8 to 11 04: Peripheral bus
Default: 0
354
Settings
This setting determines whether the RS-
232C port will operate in host link mode or
another serial communications mode.
Note Communications will not be possible
with PTs set for 1:1 NT Links.
Settings
* Set to 115,200 bps when setting this value
from the CX-Programmer. To return to the
standard setting, leave the setting set to
"PLC Setup" and set the baud rate to 9,600
bps.
Settings
This setting determines the highest unit
number of PT that can be connected to the
PLC.
Settings
*The default settings are for a baud rate of
9,600 bps.
Settings
This setting determines whether the RS-
232C port will operate in host link mode or
another serial communications mode. (Host
link can be specified with 00 or 05.)
The Peripheral Bus mode is for communica-
tions with Programming Devices other than
the Programming Console.
Function
Function
)
Function
Function
Function
Section 7-1
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)
Related When set-
flags and ting is read
words by CPU Unit
A61902 At the next
(RS-232C cycle.
Port Settings
Changing
Flag)