Omron SYSMAC CS Series Operation Manual page 680

Specifications of Basic I/O Units and High-density I/O Units
Note 1. This Unit uses only 8 bits for external I/O even though 16 bits (1 word) are allocated. This Unit is also
treated as a 16-point Unit in the I/O tables.
2. Terminal numbers A0 to A9 and B0 to B9 are used in this manual, but they are not printed on the Unit.
C200H-OD213 Transistor Output Unit (8 Points)
Circuit Configuration
Note When the fuse blows, the F indicator lights and bit 08 turns ON. Bits 08 through 15 cannot be used as
work bits.
Terminal Connections
Note 1. Be sure to supply power to A9; otherwise current will leak through the load while the output is OFF.
2. Incorrect load operation may result if polarity is not connected correctly.
642
Max. Switching Capacity
Leakage Current
Residual Voltage
ON Response Time
OFF Response Time
No. of Circuits
Internal Current Consumption
Fuse Rating
Power for External Supply
Weight
Output indicator
Internal
circuits
Fuse
Fuse blowout
detection circuit
F indicator
24 V DC
(2.1 A max., 5.2 A/Unit)
2.1 A 24 V DC (20.4 to 26.4 V DC) (5.2 A/Unit) NPN
output
0.1 mA max.
1.4 V max.
0.2 ms max.
0.3 ms max.
1 (8 points/common)
140 mA 5 V DC max.
8 A 125 V (5.2-dia. × 20)
30 mA 20.4 to 26.4 V DC min.
250 g max.
OUT
L
+ V
OUT
L
24 V DC
COM
Fuse: UL-TSC-8A-N1 (SOC)
8 A 125 V 5.2-dia. × 20
0
L
A0
1
A1
L
2
A2
L
3
A3
L
4
A4
L
5
A5
L
6
A6
L
7
A7
L
COM (0 V)
A8
24 V DC
A9
Appendix A