Omron SYSMAC CS Series Operation Manual page 239

Power Supply Units
Power Supply Unit with Replacement Notification
Power Supply Unit Replacement Notification Module
C200HW-PA204C
Function
Replacement Notification Function Displays
Note The replacement notification function provides an indication of when the dete-
rioration of the electrolytic capacitor will prevent the power supply functioning
at its full capacity. It does not provide information on failures occurring due to
other causes.
Model
C200HW-PA204C
The replacement notification for the Power Supply Unit is shown using three
7-segment LED displays.
• At time of purchase "FUL" is displayed. The display changes to "HLF" as
the electrolytic capacitor deteriorates ("HLF" may not be displayed,
depending on the operating environment).
• When the time until replacement is required drops below 2 years, the dis-
play will change corresponding to the operating time from "1.5" to "1.0" to
"0.5" to "0.0"/"A02." When the remaining service life reaches 6 months or
less, the display will alternate between "0.0" and "A02" in 2-second inter-
vals.
Output capacity: 4.6 A at 5 V DC, 0.625 A at 26 V DC, total of
30 W
With replacement notification
Replacement notification display (7-segment, red)
C200HW-PA204C C200HW-PA204C
POWER PO
POWER indicator (green)
Alarm output
TEST TE ST
(replacement notification output)
Test switch
Section 3-4
Specifications
201