Omron SYSMAC CS Series Operation Manual page 313

Examples
5. Clearing Memory
1,2,3...
This step is necessary only for CS1 CPU Units. It can be skipped for CS1-H
CPU Units.
Clearing Memory with a Programming Console
Only one cyclic task can be created when programming with a Programming
Console, although it is possible to create two or more interrupt tasks with
interrupt task numbers ranging from 1 to 3 or 100 to 131.
Note Data areas won't be cleared if they are removed from the display. If no data
areas are removed, the entire I/O memory area and PLC Setup will be
cleared.
Connect to the PLC (online) and perform the memory clear operation.
1. Clear memory.
SET
2. Indicate whether interrupt tasks will be created.
• If no interrupt tasks are being created, press the 0 and MON Keys.
• If one or more interrupt tasks are being created, press the 1 and MON
Keys.
000000 CT**
CLR
000000MEMORY CLR
NOT
RESET
CHWA TCDE
000000CLR MEM?
MON
0:ALL 1:TASK
000000CLR MEM?
0
INT 0:NO 1:YES
000000CLR'G MEM
0
INT 0:NO
000000CLR MEM
MON
END 0:NO
000000CLR'G MEM
1
INT
000000CLR MEM
MON
END
Section 4-2
P
Programming Console
1:YES
1:YES
275