Omron SYSMAC CS Series Operation Manual page 385

PLC Setup
7-1-2-3 FB Communications Instruction Settings
(Settings for OMRON FB Library)
Number of Resends
Programming
Console address
Word Bit(s)
+200 0 to 3 0 to F: 0 to 15
Default: 0
FB Communications Instruction Response Monitoring Time
Programming
Console address
Word Bit(s)
+201 0 to 15 0001 to FFFF (Unit:
0.1 s, 0.1 to 6553.5)
0000: 2 s
DeviceNet Communications Instruction Response Monitoring Time
Programming
Console address
Word Bit(s)
+202 0 to 15 0001 to FFFF (Unit:
0.1 s, 0.1 to 6553.5)
0000: 2 s
The following PLC Setup settings are used only when using the OMRON FB
Library.
Settings
Set the number of retries for sending com-
mands when executing DeviceNet explicit
messages or FINS messages within func-
tion blocks.
Note This setting does not exists in CS1@-CPU@@ CPU Units.
Settings
A response timeout occurs when no
response is returned within the time set
here for FINS commands executed within a
function block.
Note This setting does not exists in CS1@-CPU@@ CPU Units.
Settings
A response timeout occurs when no
response is returned within the time set
here for explicit messages commands exe-
cuted within a function block.
Note This setting does not exists in CS1@-CPU@@ CPU Units.
Note The number of resends and response monitoring time must be set by the user
in the FB communications instructions settings in the PLC Setup, particularly
when using function blocks from the OMRON FB Library to execute FINS
messages or DeviceNet explicit messages communications. The values set in
this PLC Setup for OMRON FB Library will be automatically stored in the
related Auxiliary Area words A580 to A582 and used by the function blocks
from the OMRON FB Library.
Function
Function
Function
Section 7-1
Related New
flags and setting's
words effective-
ness
A58000 to Start of
A58003 operation
Related New
flags and setting's
words effective-
ness
A581 Start of
operation
Related New set-
flags and ting's
words effective-
ness
A582 Start of oper-
ation
347