Omron SYSMAC CS Series Operation Manual page 80

Programmable controllers
Hide thumbs Also See for SYSMAC CS Series:
Table of Contents

Advertisement

CS1-H CPU Unit Ver. 2.0 Upgrades
CPU Unit Ver. 2.0 or Later
Summary
Usage
Details
1:1 Computer-to-PLC connection
CX-Programmer
Ethernet
I/O table not
registered
Even without an I/O table, it is
possible to make an online con-
nection, create the I/O table,
transfer the program, and per-
form other operations.
42
With the CPU Unit Ver. 2.0 and later CS/CJ-series CPU Units, the CPU Unit
can recognize a CPU Bus Unit (such as a Network Communications Unit, see
note) even if the I/O tables have not been created and there is no registered
I/O tables.
CPU Bus Unit
(including Network Communications Units)
Network
Online connection
can be made.
Note Network Communications Units include Ethernet Units, Controller Link Units,
SYSMAC Link Units, and DeviceNet Units.
If the nodes are connected to the network, this function allows a computer-
based Programming Device (such as the CX-Programmer) to connect online
to PLCs in the network even if the I/O tables have not been created. Since a
network connection is established with the PLCs, setup operations can be
performed such as creating the I/O tables (or editing and transferring I/O
tables), transferring the user program, transferring the PLC Setup, and trans-
ferring the CPU Bus Unit Setup.
This function is particularly useful when connecting the CX-Programmer via
Ethernet (using a CS1W-ETN21), because the I/O tables can be created
through Ethernet so a serial cable isn't required and it isn't necessary to
spend extra time establishing a serial connection.
1:N Computer-to-PLC connection
CX-Programmer
CS/CJ-
series
CPU Unit
Ver.2.0
• Applicable Units: All CS/CJ-series CPU Bus Units
• Applicable computer-based Programming Devices: CX-Programmer and
CX-Protocol only
• Applicable functions: Online connections from CX-Programmer and CX-
Protocol, and online functions of the applicable CPU Units and CPU Bus
Units
CS/CJ-series CPU Unit Ver.2.0 or later
CPU Bus Units (including Network Communications Units)
can be recognized before an I/O table is created.
CS/CJ-
series
CPU Unit
Ver.2.0
I/O table not registered
Ethernet
Even without an I/O table, it is possible to make an online
connection, create the I/O table, transfer the program, and
perform other operations.
Section 1-6
CS/CJ-
series
CPU Unit
Ver.2.0
I/O table not registered I/O table not registered
CS/CJ-
series
CPU Unit
Ver.2.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs1g/h-cpu_hCs1g/h-cpu_-ev1

Table of Contents