Using The Internal Clock - Omron SYSMAC CS Series Operation Manual

Using the Internal Clock

1-13 Using the Internal Clock

Key Sequence
Initial display
76
The internal clock of a CS1 CPU Unit is set to "00 year, 01 month, 01 day (00-
01-01), 00 hours, 00 minutes, 00 seconds (00:00:00), and Sunday (SUN)"
when the Battery Set is mounted in the CPU Unit.
When using the internal clock, turn ON the power supply after mounting the
Battery Set and 1) use a Programming Device (Programming Console or CX-
Programmer) to set the clock time, 2) execute the CLOCK ADJUSTMENT
(DATE) instruction, or 3) send a FINS command to start the internal clock from
the correct current time and date.
The Programming Console operation used to set the internal clock is shown
below.
FUN SHIFT MON
↑
0
CHG
↓
Specify: Yr Mo Day Hr Min S
Section 1-13
WRITE
Data