Omron SYSMAC CS Series Operation Manual page 663

Specifications of Basic I/O Units and High-density I/O Units
Terminal Connections
Note 1. This Unit uses only 8 bits for external I/O even though 16 bits (1 word) are allocated. This Unit is also
treated as a 16-point Unit in the I/O tables.
2. Terminal numbers A0 to A9 and B0 to B9 are used in this manual, but they are not printed on the Unit.
C200H-OC223 Contact Output Unit (5 Points)
Circuit Configuration
2 A 250 V AC,
2 A 24 V DC,
0.1 A 120 V DC max.
Note: There are no restrictions in the polarity
Max. Switching Capacity
Min. Switching Capacity
Relay
Service Life of Relay
ON Response Time
OFF Response Time
No. of Circuits
Internal Current Consumption
Weight
Output indicator
Internal
circuits
See note 2.
when connecting a DC power supply.
2 A 250 V AC (cosφ = 1), 2 A 250 V AC (cosφ = 0.4),
2 A 24 V DC (10 A/Unit)
10 mA 5 V DC
G6B-1174-P-FD-US-M (24 V DC) with socket
Electrical: 500,000 operations (resistive load)/
100,000 operations (inductive load)
Mechanical: 50,000,000 operations
Service life will vary depending on the current and
ambient temperature.
10 ms max.
10 ms max.
5 independent contacts
10 mA 5 V DC max. 75 mA 26 V DC (8 points ON
simultaneously.)
250 g max.
OUT
L
OUTc
250 V AC
24 V DC max.
Appendix A
625