6
Introduction
Overview
This chapter provides an alphabetical reference of commands used to configure
the GUI. For more information, see the
Feature Overview and Configuration Guide
Command List
•
•
•
•
•
C613-50170-01 Rev B
GUI Commands
"atmf topology-gui
enable" on page 221
"gui-timeout" on page 222
"log
event-host" on page 224
"service
http" on page 225
"show
http" on page 226
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started with AlliedWare Plus"
220