Viewing Software And Hardware Version Information - Agilent Technologies WireScope 350 User Manual

V†vtÃXv…rTp‚ƒr
WvrvtÃT‚s‡h…rÃhqÃCh…qh…rÃWr…†v‚ÃDs‚…€h‡v‚

Viewing Software and Hardware Version Information

2−8
To see the software and hardware revision levels, complete the following
steps:
1 On the main menu, press the System button. The System Settings
screen appears.
2 On the System Settings screen, press System Information, then
press the View button. The System Information screen appears.
The System Information screen displays serial numbers and hardware
and software version numbers for all of the key subsystems of your
WireScope 350 test set.
The WireScope 350 and DualRemote 350 windows each consist of three
parts:
• The upper section shows the serial number, software revision
level, and boot revision level of the device.
• The middle section shows the hardware revision level of the host
module, which contains the user interface and PC interface
connections
• The lower section shows the hardware revision level of the test
module.
To view information for the last used DualRemote 350, press the
DualRemote tab.