To Move Marker Information Off The Grids - Agilent Technologies 8719ES User Manual

Making Measurements
Using Markers
Figure 1-13 Active and Inactive Markers Example
• To switch off all of the markers, press

To Move Marker Information Off the Grids

If marker information obscures the display traces, you can turn off the softkey menu and
move the marker information off the display traces and into the softkey menu area.
Pressing the backspace key
Pressing alternately hides and restores the current softkey menu. The softkey menu
is also restored when you press any softkey or a hardkey which leads to a menu.
1. Set up a four-graticule display as described in
on page 1-14.
2. Activate four markers by pressing
NOTE Observe that the markers appear on all of the grids. To activate markers on
individual grids, press
MARKERS:
to have markers, press
3. Turn off the softkey menu and move the marker information off the grids by pressing
.
The display will be similar to
1-26
ALL OFF
performs this function. This is a toggle function.
Marker
Marker Fctn
to UNCOUPLED. Then, activate the channel in which you wish
, then select the markers for that channel.
Marker
Figure 1-14.
.
"Viewing Four Measurement Channels"
.
1 2 3 4
MARKER MODE MENU
, and set