To Set Up Time Correlation Between A Timing And A State Analyzer - Agilent Technologies HP 1660E Series User Manual

To set up time correlation between a timing
and a state analyzer
To set up time correlation between a timing and a state analyzer, only
the state analyzer needs to have Count Time turned on. The timing
analyzer automatically keeps track of time.
1 In the state Analyzer Trigger menu, select Count.
Count may be Count Off, Count Time, or Count States. Selecting the
field causes a pop-up to appear.
2 Select the field after Count: and select Time.
A warning may appear about reduced memory. It will not prevent you
from changing Count to Count Time.
3 Select Done.
Now when you acquire data you will be able to set up a mixed display.
Setting Up Time Correlation between Analyzers
Using the Trigger Menu
87