Table of Contents
Advertisement
19
PC Components Installation
You have just used the Asset Manager to configure the PC digitizer. The process
for configuring the test set and PC digitizer is the same process you use to add
software-controlled assets to the phase noise measurement system.
Configuring the Agilent E4411A/B (ESA-L1500A) Swept Analyzer
1
2
3
438
To configure the E4411A/B Swept Analyzer, follow the same steps you used
to configure the test set. (Refer to
page 428.)
In the Select Interface and Address box, use 8, the default GPIB address for
the E4411A/B.
(Table 74
for the system instruments.)
Click Server, then click Exit to exit the Asset Manager.
"Configuring the Phase Noise Test Set"
on page 435 contains the default GPIB addresses
on
Agilent E5505A User's Guide
Advertisement
Table of Contents
