Selecting Line Types; Choosing Scale - Agilent Technologies 8719ES User Manual

Selecting Line Types

• Press MORE and select each plot element line type that you want to modify.
— Select LINE TYPE DATA
new line type (see
— Select
LINE TYPE MEMORY
enter the new line type (see
Table 4-4 Default Line Types for Plot Elements
Plot Elements Channel 1 Line Type Numbers
Data Trace
Memory Trace
Figure 4-6 Line Types Available
NOTE You must define the line types for each measurement channel (channel 1/3
and channel 2/4).

Choosing Scale

• Press
SCALE PLOT
Choose
SCALE PLOT [FULL]
This includes space for all display annotations such as marker values and stimulus
values. The entire analyzer display fits within the defined boundaries of P1 and P2
on the plotter, while maintaining the exact same aspect ratio as the display.
Choose
SCALE PLOT [GRAT]
correspond to the defined P1 and P2 scaling point on the plotter. (Intended for
plotting on preprinted rectangular or polar forms.)
to modify the line type for the data trace. Then enter the
Figure 4-6), followed by
to modify the line type for the memory trace. Then
Figure 4-6), followed by
7
7
until the selection appears that you want.
if you want the normal scale selection for plotting.
if you want the outer limits of the graticule to
Printing, Plotting, and Saving Measurement Results
.
x1
.
x1
Channel 2 Line Type Numbers
7
7
Defining a Plot Function
4- 17