Commands In This Section - Dell N1100-ON Reference Manual

mandatory. Discovering the local domain-name server is the intended use
of multicast messages on remote networks when there is less than one
server per network.
• Applications used for datacasting: Since multimedia transmission has
become increasingly popular, multicast transmission use has increased.
Multicast transmission may be used to efficiently accommodate this type
of communication. For instance, the audio and video signals are captured,
compressed and transmitted to a group of receiving stations. Instead of
using a set of point-to-point connections between the participating nodes,
multicasting can be used for distribution of the multimedia data to the
receivers. The participating stations are free to join or leave an audio-cast
or a video-cast as needed. The variable membership maintenance is
managed efficiently through multicasting.

Commands in this Section

This section explains the following commands:
clear ip mroute
arp
ip mroute
ip multicast-routing ip pim join-prune-
ip multicast ttl-
threshold
ip pim
ip pim bsr-border
ip pim bsr-
candidate
clear ip mroute
Use this command to selectively clear IPv4 multicast entries from the cache.
ip pim dense-mode show ip mfc
ip pim dr-priority
ip pim hello-
interval
interval
ip pim rp-address
ip pim rp-candidate show ip mroute
ip pim sparse-mode show ip mroute
ip pim ssm
show ip multicast
show ip pim
boundary
show ip multicast
interface
show ip mroute
group
source
–
Layer 3 Routing Commands
show ip mroute static
show ip pim
show ip pim bsr-router
show ip pim interface
show ip pim neighbor
show ip pim rp-hash
show ip pim rp
mapping
show ip pim statistics
1569