Dell N1100-ON Reference Manual page 1554

Syntax
show ipv6 nd raguard policy
Default Configuration
By default, no RA guard policies are applied to any interface.
Command Mode
Privileged Exec, Global Configuration
User Guidelines
This command has no user guidelines.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following example configures an unnamed RA Guard policy to drop all
RA advertisements and router redirect messages on interface Gi1/0/1 (VLAN
10). The configured interfaces are shown.
console(config)#vlan 10
console(config-vlan101)#exit
console(config)#interface vlan 10
console(config-if-vlan10)#ipv6 enable
console(config-if-vlan10)#exit
console(config)#ipv6 unicast-routing
console(config)#interface gi1/0/1
console(config-if-Gi1/0/1)#switchport access vlan 10
console(config-if-Gi1/0/1)#exit
console(config)#interface gi1/0/1
console(config-if-Gi1/0/1)#ipv6 nd raguard attach-policy
console(config-if-Gi1/0/1)#show ipv6 nd raguard policy
Ipv6 RA-Guard Configured Interfaces
Interface
---------------
Gi1/0/1
Role
-------
Host
Layer 3 Routing Commands
1554