Table of Contents
Advertisement
Field
Valid MLD Packets
Received
Valid MLD Packets Sent
Queries Received
Queries Sent
Reports Received
Reports Sent
Leaves Received
Leaves Sent
Bad Checksum MLD
Packets
Malformed MLD Packets
Example
console#show ipv6 mld traffic
Valid MLD Packets Received..................... 52
Valid MLD Packets Sent......................... 7
Queries Received............................... 0
Queries Sent................................... 7
Reports Received............................... 52
Reports Sent................................... 0
Leaves Received................................ 0
Leaves Sent.................................... 0
Bad Checksum MLD Packets....................... 0
Malformed MLD Packets.......................... 0
show ipv6 nd raguard policy
Use this command to display the RA Guard policy on all interfaces for which
it is enabled.
Description
The number of valid MLD packets received by the
router.
The number of valid MLD packets sent by the router.
The number of valid MLD queries received by the
router.
The number of valid MLD queries sent by the router.
The number of valid MLD reports received by the
router.
The number of valid MLD reports sent by the router.
The number of valid MLD leaves received by the router.
The number of valid MLD leaves sent by the router.
The number of bad checksum MLD packets received by
the router.
The number of malformed MLD packets received by the
router.
Layer 3 Routing Commands
1553
Advertisement
Table of Contents
