Show Ipv6 Mld Host-Proxy Groups Detail - Dell N1100-ON Reference Manual

Group Address The IP address of the multicast group.
Last Reporter The IP address of the host that last sent a membership report for the
current group on the network attached to the MLD-Proxy interface
(upstream interface).
Up Time (in The time elapsed in seconds since last created.
secs)
Member State Possible values are:
• Idle_Member — The interface has responded to the latest group
• Delay_Member — The interface is going to send a group
Filter Mode Possible values are Include or Exclude.
Sources The number of sources attached to the multicast group.
Example
console#show ipv6 mld host-proxy groups
Interface................................ vlan 10
Group Address Last Reporter
------------- -------------- ---------- ----------------- ------------ -----
--
FF1E::1 FE80::100:2.3
FF1E::2 FE80::100:2.3
FF1E::3 FE80::100:2.3
FF1E::4 FE80::100:2.3

show ipv6 mld host-proxy groups detail

Use the show ipv6 mld host-proxy groups detail command to display
information about multicast groups that MLD Proxy reported.
Syntax
show ipv6 mld host-proxy groups detail
Default Configuration
There is no default configuration for this command.
membership query for this group.
membership report to respond to a group membership query for
this group.
Up Time
00:01:40
00:02:40
00:01:40
00:02:44
Member State
DELAY_MEMBER
DELAY_MEMBER
DELAY_MEMBER
DELAY_MEMBER
Layer 3 Routing Commands
Filter Mode Sources
Exclude
Include
Exclude
Include
2
1
0
4
1549