Program 22 : Incoming Call Setup; System Options For Incoming Calls - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Level:
IN
Description
Use Program 22-01 : System Options for Incoming Calls to define the

system options for incoming calls.

Input Data
Item
Item
No.
01
Incoming Call
Priority
02
Incoming Call
Ring No Answer
Alarm
03
Ring No Answer
Alarm Time
04
DIL No Answer
Recall Time
05
--- Not Used ---
06
DID Ring-
No-Answer Time
07
DID Incoming
Ring Group No
Answer Time
Programming Manual

Program 22 : Incoming Call Setup

22-01 : System Options for Incoming Calls
Input Data Default
0 = Intercom 1
Call
Priority
1 = Trunk Call
Priority
0 = Disable 0
(Off)
1 = Enable
(On)
0~64800 (sec) 60
0~64800 (sec) 0
0~64800 (sec) 20
0~64800 (sec) 20
Description
Use this option to determine if Intercom
calls or trunk calls have answer priority
when both are ringing simultaneously.
If enabled, an incoming call that rings
longer than the Ring No Answer Alarm
interval (22-01-03), changes to a
unique ring cadence to indicate that the
call has been ringing too long. If
disabled, this does not occur.
If a trunk rings a multiline telephone
longer than this interval, the system
changes the ring cadence. This
indicates to the user that the call has
been ringing too long.
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
In systems with DID Ring-No-Answer
Intercept, this interval sets the
Ring-No-Answer time. This interval is
how long a DID call rings the
destination extension before rerouting
to the intercept ring group.
Program
22
Related
Program
15-02-22
22-01-03
22-01-04
22-01-02
22-12
2 - 287