Mobile Extension Setup - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
IN
Description
Use Program 15-22 : Mobile Extension Setup to set the system information for the
Mobile Extension feature.
Input Data
Item
No.
01
02
03
Conditions
None
Feature Cross Reference
None
2 - 194
Program 15 : Extension, Basic Setup
Extension Number
Item
0~1999 (0 = No setting/1~1999 = target of mobile
Mobile Extension Target
Setup
extension)
Set which Speed Dial bin
is used to call when the
Mobile extension is
called.
0
Connect Confirmation
1
Select when a
2
confirmation (dial ) is
required to allow the call
to cut over to the called
mobile number.
0
Trunk Access Code
1
Select if the Normal (0) or
Individual (1) Trunk
access is used when
making the call to the
mobile number.

15-22 : Mobile Extension Setup

Input Data
= Always
= On Analog Line
= Never
= Use normal trunk access code (11-09-01)
= Use individual trunk access code (11-09-02)
Program 15 : Extension, Basic Setup
UNIVERGE SV8100
Up to eight digits
Default
0
0
0