Configuring A Drive; Starting The Configuration - Siemens sinamics G120 Operating Instructions Manual

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Commissioning

5.3 Quick commissioning with a PC.

Configuring a drive

To start the configuration, proceed as follows:

1. In STARTER select the drive you wish to commission.

2. Start the wizard for the device configuration:

You have started the configuration.

Proceed as follows to carry out quick commissioning:

Start the configuration in STARTER

Start the configuration in Startdrive

When selecting an application class, the inverter assigns the motor con-

trol with the appropriate default settings:

Standard Drive Control (Page 127)

Dynamic Drive Control (Page 128)

• [0] Expert - or if no application class is listed:

Dynamic Drive Control (Page 128)

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Converter with CU250S-2 Control Unit