Siemens sinamics G120 Operating Instructions Manual page 474

Appendix
A.1 New and extended functions
Function
27 Extending communication via BACnet:
Access to parameters and analog inputs
28 The bus error LED for communication via USS and Modbus can
be switched off
29 Default of the minimum speed to 20% of the rated motor speed
30 For commissioning with an operator panel, the inverter auto-
matically backs up the measured data retentively in the ROM
after identification of the motor data.
31 The result of the energy savings calculation for flow machines
is available as a connector
32 New "ppm" unit (parts per million) for unit switching
33 Displaying speeds during commissioning via operator panel in
units of Hz instead of rpm. Conversion from Hz to rpm via
p8552
34 Voltage-dependent current limit for 600V devices of Power
Module PM330 and PM240-2
474
SINAMICS
G120
- - ✓
✓ ✓ ✓
- - ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
- - ✓
- - ✓
Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE
G120D
- - - - -
✓ ✓ ✓ - -
- - - - -
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓
- - - - -
✓ ✓ ✓ - -
Converter with CU250S-2 Control Unit
-
-
-
✓
✓
✓
-
-