Siemens sinamics G120 Operating Instructions Manual page 176

Advanced commissioning
6.2 Inverter control
Bit
13
14
15
If you change over from another telegram to telegram 20, then the assignment of the previous
1)
telegram is kept.
176
Significance
Telegram 20 All other tele-
grams
--- 1 = MOP up
1)
--- 1 = MOP down Reduce the setpoint saved in the motorized
1)
CDS bit 0 Reserved
Explanation
Increase the setpoint saved in the motorized
potentiometer.
potentiometer.
Changes over between settings for different
operation interfaces (command data sets).
Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE
Signal inter-
connection
in the in-
verter
p1035[0] =
r2090.13
p1036[0] =
r2090.14
p0810 =
r2090.15
Converter with CU250S-2 Control Unit