Dimensioned Drawings, Drilling Dimensions For The Pm260 Power Module; Dimensioned Drawings, Drilling Dimensions For The Pm340 Power Module - Siemens sinamics G120 Operating Instructions Manual
Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation
Hide thumbs
Also See for sinamics G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Installing
4.4 Installing Power Modules
4.4.7
Dimensioned drawings, drilling dimensions for the PM260 Power Module
The dimensioned drawings and drilling dimensions for the PM260 Power Module are
available in the Internet:
Installation Guide for the PM260 Power Module
(https://support.industry.siemens.com/cs/ww/en/view/79109730)
4.4.8
Dimensioned drawings, drilling dimensions for the PM340 Power Module
The following dimensioned drawings and drilling patterns are not to scale.
Image 4-1
The Power Modules can be mounted and operated side-by-side. For tolerance reasons, we
recommend a lateral clearance of approx. 1 mm.
Cooling clearances and fastening
● Top cooling clearance: 100 mm
● Bottom cooling clearance:
● Front cooling clearance:
● For fastening:
Depth with Control Unit and Operator Panel
• with Control Unit:
• With Control Unit and blanking cover / BOP-2:
• With Control Unit and IOP:
70
Mounting dimensions and drilling dimensions (mm)
100 mm
65 mm
2 x M4 / 2.5 Nm
Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE
207 mm
218 mm
229 mm
Converter with CU250S-2 Control Unit
Advertisement
Table of Contents
