Siemens sinamics G120 Operating Instructions Manual page 160

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Advanced commissioning

6.2 Inverter control

Skip frequency band

Skip frequency band of the analog input

Using an analog input as digital input

An analog input can also be used as digital input.

Skip frequency band of the analog input AI 0 (factory setting: 0)

Skip frequency band of the analog input AI 1 (factory setting: 0)

Digital inputs (Page 152)

Interferences in the cable can corrupt

small signals of a few millivolts. To be

able to enter a setpoint of exactly 0 V

via an analog input, you must specify

a skip frequency band.

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Converter with CU250S-2 Control Unit