Siemens sinamics G120 Operating Instructions Manual page 98

Installing
4.6 Installing Control Unit
Default setting 15: "Process industry"
MOP = motorized potentiometer
DO 0: p0730, DO 1:
p0731
Motorized potentiometer setpoint after ramp-function generator: r1050
Speed setpoint (main setpoint): p1070[0] = 755[0], p1070[1] = 1050
Designation in the BOP-2: Proc
Default setting 17: "2-wire (forw/backw1)"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: 2-wIrE 1
98
AO 0: p0771[0], AO 1:
p0771[1]
AO 0: p0771[0], AO 1:
p0771[1]
Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE
DI 0: r0722.5, ..., DI 4:
r0722.5
DI 0: r0722.2, ..., DI 2:
r0722.2
Converter with CU250S-2 Control Unit
AI 0: r0755[0]
AI 0: r0755[0]