Motor Holding Brake - Siemens sinamics G120 Operating Instructions Manual

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Motor holding brake

The motor holding brake holds the motor in position when it is switched off. If the setting is

correct, the motor will produce an electrical holding torque before the inverter opens the

brake. The inverter does not close the motor holding brake until the motor is at a standstill.

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Motor holding brake function

Advanced commissioning

6.7 Application-specific functions