Install And Connect The Brake Relay - Pm240-2 Power Module - Siemens sinamics G120 Operating Instructions Manual

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Install and connect the Brake Relay - PM240-2 Power Module

Installing the Brake Relay

● FSA ... FSC: Install the Brake Relay next to the Power Module.

● FSD ... FSF: Install the Brake Relay at the rear of the lower shield plate. Attach the Brake

Relay before you install the shield plate.

Connecting the Brake Relay to the inverter

The connector for the Brake Relay is located at the front of the Power Module. Lay the cable

harness for the Brake Relay in the cable routing.

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

4.5 Connecting the line supply, motor, and inverter components