Installing; Overview Of The Inverter Installation - Siemens sinamics G120 Operating Instructions Manual

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Installing

Installing the inverter

Precondition

Before installation, please check:

● Are the required inverter components available?

– Power Module

– Control Unit

– Accessories, e.g. line reactor or braking resistor

● Do you have the necessary tools and small parts/components required to install the

To install the inverter, proceed as follows:

1. Install the accessories (reactors, filter or braking

resistor) for the Power Module:

2. Install the Power Module.

3. Install the Control Unit.

You have installed all components of the inverter.

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Installing reactors, filters and braking resistors

Installing Power Modules (Page 59)

Installing Control Unit (Page 84)