Siemens sinamics G120 Operating Instructions Manual page 465

Property
Environmental conditions for long-term storage in the product packaging
Climatic environmental
conditions
Mechanical environmental
conditions (shocks and
vibrations)
Protection against chemical
substances
Biological environmental
conditions
Environmental conditions during operation
Installation altitude
Restrictions for spe-
cial ambient conditions
(Page 469)
Climatic environmental
conditions
Mechanical environmental
conditions (shocks and
vibrations)
Protection against chemical
substances
Biological environmental
conditions
Cooling air
Pollution
Approvals
UL, cUL, CE, c-tick, SEMI
F47.
Converter with CU250S-2 Control Unit
Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE
Version
The device is suitable for temperatures that conform with 1K4 according to EN 60721-3-1 in
the range -25° ... +55° C
The device is suitable for operation in mechanical environmental conditions that conform
with 1M2 according to EN 60721-3-1
The device is protected against damaging chemical substances that conform with 1C2 ac-
cording to EN 60721-3-1
The device is suitable for operation in biological environmental conditions that conform with
1B2 according to EN 60721-3-1
without derating:
with derating:
Better than 3K3 according to EN 60721-3-3
Temperature range without derating
•
– LO base load power
– HO base load power:
Temperature range with derating
•
– LO/HO base load power:
Restrictions for special ambient conditions (Page 469)
Relative humidity: 5 ... 95%, condensation not permitted
•
Oil mist, salt mist, ice formation, condensation, dripping water, spraying water, splashing
•
water and water jets are not permitted
The device is suitable for operation in mechanical environmental conditions that conform
with 3M1 according to EN 60721-3-3
Vibration test according to IEC 60068-2-6 with 10 vibration cycles per axis
•
– in the range 10 Hz ... 57Hz with a deflection of 0.075 mm
– in the range 57 Hz ... 150Hz with an acceleration of 1 g
Shock resistance according to IEC 60068-2-27 with three impulses per axis in both direc-
•
tions
– Peak acceleration: 5 g
– Duration: 30 ms
protected against damaging chemical substances that conform with 3C2 according to EN
60721-3-3
suitable for operation in biological environmental conditions that conform with 3C2 according
to EN 60721-3-3
clean and dry air
suitable for environments with degree of pollution 2 according to EN 61800-5-1, condensa-
tion not permitted
The drive only satisfies the UL requirements when UL-certified fuses are used.
10.2 Technical data, Power Modules
up to 1000 m above sea level
up to 4000 m above sea level
1)
0 °C ... +40 °C
0° C ... +50° C
1)
0 °C ... +60 °C
Technical data
465