Setpoints; Overview - Siemens sinamics G120 Operating Instructions Manual

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Setpoints

The inverter receives its main setpoint from the setpoint source. The main setpoint mainly

specifies the motor speed.

You have the following options when selecting the source of the main setpoint:

● Inverter analog input.

● Inverter fieldbus interface.

● Motorized potentiometer simulated in the inverter.

● Fixed setpoints saved in the inverter.

You have the same selection options when selecting the source of the supplementary

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Setpoint sources for the inverter

Advanced commissioning

6.3 Setpoints