Configuring The Safety Functions - Siemens Sinamics G120 Function Manual

Commissioning

5.8 Configuring the safety functions

5.8 Configuring the safety functions
You define the following when configuring the safety functions:
● Which safety functions are available?
● Which interfaces are available for the safety functions?
1)
Figure 5-1
Selected configuration
Selecting STO via Power
Module terminals
112
The "STO via Power Module terminals" function is only possible with the PM240‑2 and PM240P‑2,
FSD ... FSE Power Modules. There are three options when configuring the function:
● You use the "STO via Power Module terminals " function together with the basic functions.
● You use the "STO via Power Module terminals " function together with the extended functions.
● You use the "STO via Power Module terminals " function as the only safety function.
Overview of the possible configurations
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Scope and interfaces of the safety functions
Select STO via the Power Module terminals
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD