Siemens sinamics G120 Operating Instructions Manual page 352

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Backing up data and series commissioning

7.1 Saving settings on a memory card

Manually backing up

Preconditions

• The inverter power supply has been switched on.

• No memory card is inserted in the inverter.

Procedure with STARTER

Proceed as follows to back up your settings on a memory card:

1. Go online.

2. Press the "Copy RAM to ROM" button

3. In your drive, select "Drive Navigator".

4. Select the "Commissioning" button.

5. Select the button to transfer the settings to the memory card.

6. Select the settings as shown in the diagram and start the data backup.

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Converter with CU250S-2 Control Unit