Table of Contents
Advertisement
Setting the Display of Media Detec-
tion
Set the following two items in media detection settings.
When loading the media, set whether
to detect the media width automatically
Setting of Media
(AUTO) or decide the print range
Detection
manually (MANUAL).
• When using the media that cannot be detected by
the sensor, set the media detection setting to
"MANUAL".
• When "MANUAL" is selected, the values of
"MARGIN (RIGHT/LEFT)" on the SETUP MENU
have no effect. (
Press the
1
Press
to select "Machine Setup",
2
and press the
Press the
3
Press
to select "Media Detect",
4
and press the
Press
to select AUTO/MANUAL,
5
and press the
Press the
6
end the setting.
Setting the CONFIRM. FEED
Set whether media feeding is performed for checking the
result of the test printing etc. or not.
Press the
1
Press
to select "Machine Setup",
2
and press the
Press the
3
Press
to select "CONFIRM.
4
FEED" , and press the
Press
to select a set value, and
5
press the
• Set value : ON/ OFF
Press the
6
end the setting.
P.3-8)
(MENU) in Local.
key.
(>>) .
key.
key.
key several times to
(MENU) in Local.
key.
(>>) .
key.
key.
key several times to
Set the network
Press the
(MENU) in Local.
1
Press
to select "Machine Setup"
2
and press the
Press the
(<<) .
3
Press
to select "Network & Mail"
4
and press the
Press
to select "Network" and
5
press the
Press
to select "Check IP
6
Address" and press the
• The IP address currently used by this machine is
displayed.
• After connecting with the network, it takes time
until the IP address is determined.
If the IP address has not been determined,
"0.0.0.0" is displayed.
Press
to select "Check MAC
7
Address" and press the
• The MAC address currently used by this machine
is displayed.
Press
to select "DHCP" and
8
press the
• Press [][] to set ON/ OFF.
• When it is ON, the IP address given by the DHCP
server is used.
Press
to select "AutoIP" and
9
press the
• Press """" to set ON/ OFF.
• When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
Press
to select the set values
10
and press the
• Both of DHCP and AutoIP is OFF, you can set IP
Address/ Default Gateway/ DNS Address/ Sub
Net Mask. For other than above, proceed to the
Step 13.
key.
key.
key.
key.
key.
key.
key.
key.
3-15
3
2
2
Advertisement
Table of Contents
